Reaper 2 Pedal Foot Switch for VFD

Description

Limited initial stock available – don’t miss out!

Reaper 2 Pedal Foot Switch for use with our Techtop and Artisan Essentials VFD units. Allows easy, hands-free operation of your VFD in both clockwise and anticlockwise directions. Add one to your existing disc grinder setup for improved control and functionality.

Features and Benefits

• 2 pedal control allows the disc to be run in clockwise/anticlockwise directions, without the need to touch the VFD
• Hands free operation that lets you position your workpiece on the disc surface before starting the grinder, reducing the risk of errors
• Versatile, can be wired to a variety of VFD units. This includes our Techtop and Artisan Essentials VFDs, as well as the older TECO e510
• Supplied prewired with 2m cable for ease of installation

Important note

This pedal will need to be wired to the VFD according to the VFD manufacturer’s instructions. Your VFD will need to be re-programmed in order for the foot switch to operate. Installing this foot switch will remove the functionality of the forward/reverse switches on most VFDs. The installer will need to ensure that the cable insertion is appropriately sealed against dust and moisture to maintain the IP rating of the VFD unit.

Often purchased with  1.5HP motor and VFD and 2HP motor and VFD

Keep shopping: Motors, VFDs and Switches »