Kalderum Blades San Mai Coppermascus Steel Bar *K009. Made with Apex Ultra core and low layer coppermascus cladding in a "Ladder" pattern.
Example of Kalderum Blades San Mai Coppermascus Steel Bar with "Ladder" pattern.
Kalderum Blades San Mai Coppermascus Steel Bar *K009. Made with Apex Ultra core and low layer coppermascus cladding in a "Ladder" pattern.
Example of Kalderum Blades San Mai Coppermascus Steel Bar with "Ladder" pattern.

Kalderum Blades San Mai Coppermascus Steel Bar – Apex Ultra Core *K009

0 out of 5

AU $460.00

Kalderum Blades San Mai Coppermascus Steel Bar*K009. Made with Apex Ultra core and low layer coppermascus cladding in a “Ladder” pattern. Dimensions are approx. 340 x 55/35 mm (including tang), and 3.0mm thick.

Availability: Only 1 left in stock SKU: KAL-APEXCORE-BAR*K009

Description

Kalderum Blades San Mai Coppermascus Steel Bar *K009. Made with Apex Ultra core and low layer coppermascus cladding in a “Ladder” pattern. This bar has been straightened, fine-grained, normalized and soft-annealed, as well as chemically descaled.

Dimensions are approx. 340 x 55/35 mm (including tang), and 3.0mm thick. (dimensions are slightly smaller than the actual pieces, as 1-2 mm of the edge area is unusable)

This is a unique one-off piece of steel made by Kalderum Blades from Austria.

Heat treatment instructions:

Heat steel at 830ºC for 10 minutes then Oil quench. Tempter at 170-200ºC for two hours, twice.

These instructions are also supplied with the steel bar.

Continue Shopping: San Mai and Damascus »